|
|
| Water tank with indirect heating:VT Variants with 100, 120 and 150 liters! | |
The water tanks with indirect heating are heaters, where the heating is produced by a primer warm water from an outer (e. g. a standing or wall-mounted) boiler. The time of the heating is relatively short, that’s why there no temperature variation. This type is very useful with sun-collector systems.
- Long life and quick water heating
- The heating of the water happens with a heat-exchanger on the lower part of the tank and so it is possible to avoid formation of bacteria
- With a very good polyurethane insulation the thermal loss is minimal
- Duplex protection against corrosion: a very good enamelled tank and anodic bar from magnesium
- Easy use and maintenance
- Excellent performance
| Type |
VT100 |
VT120 |
VT150 |
| Nominal volume (l) |
100 |
120 |
150 |
| Surface of the heat exchanger (m2) |
0,97 |
1,4 |
1,4 |
| Typical performance of the heater (kW) |
28 |
42 |
42 |
| Quantity of heated water ΔT=50 °C (l/h) |
480 |
723 |
723 |
| Quantity of heated water ΔT=35 °C (l/h) |
686 |
1032 |
1032 |
| Nominal pressure of the tank (bar) |
6 |
6 |
6 |
| Max. pressure in the heat-exchanger (bar) |
6 |
6 |
6 |
| Empty weight of the device (kgs) |
62 |
77 |
88 |
Outer dimensions (mms)
A
D |
930
520 |
1045
545 |
1286
520 |
Dimensions of the connection
1. Cold water
2. Useful warm water
3., 4., Heat exchanger
5. Circulation
|
G 1/2”
G 1/2”
G 3/4”
G 3/4” |
G 3/4”
G 3/4”
G 3/4”
G 3/4” |
G 3/4”
G 3/4”
G 3/4”
G 3/4”
|
|
|
|
